| Settings |
|
|
|
|
|
|
|
| Default settings are underlined. | ||||||
Make settings for wired LAN. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Only set “Settings” when connecting to a network without a DHCP function. |
|
|
|
| |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Setting details |
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Network |
|
|
|
|
|
| Network/Settings | e |
|
|
|
| ||
| Information |
|
|
|
|
| DHCP |
| w |
|
|
|
|
|
|
|
|
|
|
|
| Off |
|
|
|
| |||||
| IP Control |
|
|
|
|
| IP Address |
|
| 192.168.000.001 |
| t |
|
| |
| Friendly Name | q |
|
|
| r | Subnet Mask | 255.255.255.000 |
|
|
|
| |||
| Settings |
|
|
| Default Gateway |
|
|
|
|
| |||||
|
|
|
|
| 255.255.255.000 |
| y |
|
| ||||||
| Maintenance Mode |
|
|
|
|
| Primary DNS | 000.000.000.000 |
|
|
| ||||
|
|
|
|
|
|
| Secondary DNS | 000.000.000.000 |
|
|
|
| |||
|
|
|
|
|
|
| Proxy |
|
|
|
|
|
|
|
|
| Selects how configure the network settings |
|
|
| Configure the network settings manually |
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
q On the menu, select “Network” – “Settings” and press ENTER. w Use ui to select “DHCP”, then press ENTER.
e Use o p to select “Off”, then press ENTER.
r Use ui to select “IP Address”, then press ENTER.
•IP Address : Set the IP address within the ranges shown below.
The Network Audio function cannot be used if other IP addresses are set.
CLASS A: 10.0.0.1 – 10.255.255.254
CLASS B: 172.16.0.1 – 172.31.255.254
CLASS C: 192.168.0.1 – 192.168.255.254
tUse uio p to input the address and press ENTER. y Use ui to select the setting item, then press ENTER.
•Subnet Mask : When connecting an xDSL modem or terminal adapter
directly to this unit, input the subnet mask indicated in the documentation supplied by your provider. Normally input 255.255.255.0.
• Default Gateway : When connected to a gateway (router), input its IP address.
•Primary DNS, Secondary DNS : If there is only one DNS address indicated in the documentation supplied by your provider, input it at “Primary DNS”. If there are two or more DNS addresses, input the first one at “Secondary DNS”.
uPress o or BACK.
The display returns to the original screen.
•When connecting to the network via a Proxy server, select “Proxy” and press ENTER (vpage 127 “Proxy settings”).
Network
Setting details
•If you are using a broadband router (DHCP function), there is no need to make the settings at “IP Address” and “Proxy”, since the DHCP function is set to “On” in this unit’s default settings.
•If this unit is being used connected to a network without the DHCP function, the network settings must be made. In this case, some knowledge of networks is required. For details, consult a network administrator.
•If you cannot connect to the Internet, recheck the connections and settings (vpage 25).
•If you do not understand about Internet connection, contact your ISP (Internet Service Provider) or the store from which you purchased your computer.
•When you want to cancel the setting during IP address input, press o or BACK.
vSee overleaf
version Basic
version Advanced
Information
DVD | 126 |