Press X ON/STANDBY while you press and hold DISPLAY and M-DAXwith the unit in standby mode.

Dual backup memory function

The unit stores settings information in nonvolatile memory even when the main power supply is turned off. Using the Dual Backup Memory function, you can write settings information to another memory area to back up saved settings for recovery anytime as needed. Remembering set details (Backup).

PRESET CH + DISPLAY

Panel lock function

To prevent accidental operation of this unit, you can disable operation of the buttons on the front panel.

X ON/STANDBY PRESET CH + DISPLAY

version Basic

PRESET CH –nnRemembering set details (Backup)

Set the unit in the state you want remembering, and press and hold PRESET CH + and PRESET CH – for at least 3 seconds.

“MEMORY SAVING” is shown in the display, and the setting details are remembered.

NOTE

•The volume is not remembered.

•If remembered details are overwritten, the previously remembered contents are deleted.

M-DAX PRESET CH – STATUSnnDisabling all key button operations

1 Press X ON/STANDBY while you press and hold DISPLAY and M-DAXwith the unit in standby mode.

2 Press PRESET CH + or PRESET CH – to select “P/V LOCK On”.

3 Press STATUS to enter the setting.

All button operations except X ON/STANDBY are disabled.

version Advanced

Information

nnRecalling remembered details (Recovery)

nnDisabling all button operations except VOLUME

Press and hold PRESET CH + and DISPLAY together for at least 3 seconds.

“MEMORY LOAD” is shown in the display, and the remembered details are recalled.

NOTE

•If there is no remembered data, “NO BACKUP” is shown in the display, and no remembered details are recalled.

•As the volume cannot be recalled, it returns to the factory setting volume.

DVD

95

1

2 Press PRESET CH + or PRESET CH – to select “FP LOCK On”.

3 Press STATUS to enter the setting.

All button operations except X ON/STANDBY and VOLUME are disabled.

v See overleaf