Speaker connection

Connecting 6.1-channel speakers using one surround back speaker

If using only one surround back speaker, connect to the “L” side of the SURROUND BACK terminal. For speaker settings in this case, see “When 6.1ch speakers are installed” (vpage 78).

To perform 6.1-channel playback using the surround back speaker, set “Assign Mode” to “Surround Back” in steps 3 to 5 for “Set up “Amp Assign”” (vpage 87).

Also use the “Speaker Config.” setting (vpage 122) to set “Surr. Back” to “1spkr”.

Cables used for connections

Audio cable (sold separately)

Speaker cable

Subwoofer cable

NOTE

•For speaker cable connections, see page 79.

•For speaker impedance , see page 79.

FL SW

FR

 

C

SL

SR

SB

DVD

82

Information version Advanced version Basic