Setting items | Setting details |
|
|
Levels | Test Tone Start : Output test tone. |
Set the volume of the test | • Front L / F.Height L / Center / F. Height R / Front R / Surround R / |
tone to be the same when it | Surr. Back Rz / Surr. Back Lz / Surround L / Subwoofer : Select |
is output from each speaker. | speaker to output test tone. |
| zz When the “Speaker Config.” – “Surr. Back” setting (vpage 121) is |
| set to “1spkr”, “Surr. Back” is displayed. |
| • |
| When “Levels” is adjusted, the adjusted values are set for all the sound |
| modes. |
| NOTE |
| • Speakers set to “None” in the “Speaker Config.” (vpage 121) |
| settings are not displayed. |
| • When a headphones jack is inserted in the PHONES jack of this unit, the |
| “Levels” is not displayed. |
Set Defaults : The “Levels” settings are returned to the default settings.
•Yes : Reset to the defaults.
•No : Do not reset to the defaults.
When you select “Set Defaults” and press ENTER, the “Reset to the default values?”
prompt is displayed. Select either “Yes” or “No”, and press ENTER.
| Speakers | |
|
| |
Setting items | Setting details | |
|
| |
Crossovers | Crossover : Set the crossover frequency. | |
Set the maximum frequency | • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / | |
of the bass signal output | 250Hz / Individual : Set the crossover frequency for all speakers. See the | |
from each channel to | speaker manual for information concerning speaker crossover frequency. | |
the subwoofer. Set the | The following settings can be set when the “Crossover” setting is set to | |
Crossover Frequency to | ||
“Individual”. | ||
suit the bass reproduction | ||
• Front / Center / Surround / Surr. Back / Front Height : Select speaker | ||
capability of the speaker | ||
for setting of crossover frequency. | ||
being used. | ||
• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / | ||
| ||
| 250Hz : Set the crossover frequency. | |
| • “Crossovers” can be set when the “Bass” – “Subwoofer Mode” | |
| (vpage 122) setting is “LFE+Main”, or when you have a speaker that | |
| is set to “Small”. | |
| • Always set the crossover frequency to “80Hz”. When using small | |
| speakers, however, we recommend setting the crossover frequency to | |
| a higher frequency. | |
| • For speakers set to “Small”, sound below the crossover frequency | |
| is cut from the sound output. The cut bass sound is output from the | |
| subwoofer or front speakers. | |
| • The speakers that can be set when “Individual” is selected differ | |
| depending on to the “Subwoofer Mode” setting (vpage 122). | |
| • When “LFE” is selected, speakers set to “Small” at “Speaker Config.” | |
| can be set. If the speakers are set to “Large”, “Full Band” is displayed | |
| and the setting cannot be made. | |
| • If set to “LFE+Main”, this setting can be made regardless of the | |
| speaker size. | |
Front Speaker | A : Front speaker A is used. | |
Set the front speakers to | B : Front speaker B is used. | |
use. | A+B : Both front speakers A and B are used. |
NOTE
This can be set when “Assign Mode” is set to “Front B” (vpage 121).
version Basic
version Advanced
Information
DVD | 123 |