Language

Default settings are underlined.

Set the language for display on the menu screen.

Setting details

English / Français / Español

“Language” can also be set by the following procedure. However, the menu screen is not displayed. Following the display content to make the setting.

1.Press and hold the main unit’s STATUS and ZONE2 SOURCE for at least 3 seconds. “Video Format < NTSC >” appears on the display.

2.Press the main unit’s DISPLAY and set “GUI Language ENGLISH”.

3.Use the main unit’s PRESET CH +, – and set the language.

4.Press the main unit’s STATUS to complete the setting.

ZONE2 Setup

Default settings are underlined.

Set the audio to play back with ZONE2.

•“ZONE2 Setup” is displayed when “ZONE2” is selected with “Assign Mode” (vpage 121).

Setting items

Setting details

Lch Level

–12dB – +12dB (0dB)

Adjust the left channel

 

output level.

 

Rch Level

–12dB – +12dB (0dB)

Adjust the right channel

 

output level.

 

Volume Limit

Off : Do not set a maximum volume.

Make a setting for

60 (–20dB) /70 (–10dB) /80 (0dB)

maximum volume.

This is displayed from –79 dB to 18 dB when “Scale” (vpage 108)

 

 

is set to “–79.5dB – 18.0dB”.

Power On Volume

Last : Use the memorized setting from the last session.

Define the volume setting

Mute : Always mute when power is turned on.

that is active when the

1 – 98 (–79dB – 18dB) : The volume is adjusted to the set level.

power is turned on.

This is displayed from –79 dB to 18 dB when “Scale” (vpage 108)

 

 

is set to “–79.5dB – 18.0dB”.

Mute Level

Full : The sound is muted entirely.

Set the amount of

–40dB : The sound is attenuated by 40 dB down.

attenuation when muting

–20dB : The sound is attenuated by 20 dB down.

is on.

 

General

Zone Rename

Change the display title of each zone to one you prefer.

Setting details

MAIN ZONE / ZONE2

•Up to 10 characters can be input.

•For character input, see page 104.

Trigger Out

Selects when to activate trigger out.

For details about how to connect the DC OUT jacks, see “DC OUT jacks” (vpage 90).

Setting details

nn When setting for zone (MAIN ZONE / ZONE2)

Trigger out is activated through linkage to the power of the zone set to “On”.

nn When setting for input source

Activate trigger out when the input source set to “On” is selected.

Active for the zone set to “On” with “When setting for zone”.

•On : Activate trigger on this mode.

•– – – : Do not activate trigger on this mode.

version Basic

version Advanced

Information

DVD

129