Setting items | Setting details |
|
|
Speaker Config. | Front Height : Set the presence and size of the front height speakers. |
(Continued) | • Large : Use a large speaker that can adequately play back low |
| frequencies. |
| • Small : Use a small speaker that has inadequate playback capacity for |
| low frequencies. |
| • None : Select when the front height speakers are not connected. |
| NOTE |
| When “Assign Mode” setting (vpage 121) is “Front Height”, you can |
| make the “Front Height” setting. |
Bass | Subwoofer Mode : Select low range signals to be reproduced by |
Set subwoofer and LFE | subwoofer. |
signal range playback. | • LFE : The low range signal of the channel set to “Small” speaker size is |
added to the LFE signal output from the subwoofer.
• LFE+Main : The low range signal of all channels is added to the LFE signal output from the subwoofer.
• “Subwoofer Mode” can be set when “Speaker Config.” – “Subwoofer” (vpage 121) is set to “Yes”.
• Play music or a movie source and select the mode offering the strongest bass.
• Select “LFE+Main” if you want the bass signals to always be produced from the subwoofer.
NOTE
If “Front” and “Center” for “Speaker Config.” are set to “Large”, and “Subwoofer Mode” is set to “LFE”, no sound may be output from the subwoofers, depending on the input signal or selected sound mode.
LPF for LFE : Set LFE signal playback range. Set this when you want to change the playback frequency of the subwoofer.
•80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz
Speakers
Setting items | Setting details |
Distances | Unit : Set the unit of distance. |
Set distance from listening | • Feet / Meters |
position to speakers. | Step : Set the minimum variable width of the distance. |
Measure beforehand the | • 1ft / 0.1ft |
distance from the listening | • 0.1m / 0.01m |
position to each speaker. | Set Defaults : The “Distances” settings are returned to the default |
| |
| settings. |
| • Yes : Reset to the defaults. |
| • No : Do not reset to the defaults. |
| When you select “Set Defaults” and press |
| ENTER, the “Reset to the default values?” |
| prompt is displayed. Select either “Yes” or |
| “No”, and press ENTER. |
Front L / Front R / F. Height L / F. Height R / Center / Subwoofer / Surround L / Surround R / Surr. Back Lz / Surr. Back Rz : Select speaker for distance setting.
zz When the “Speaker Config.” – “Surr. Back” setting (vpage 121) is set to “1spkr”, “Surr. Back” is displayed.
•0.0ft – 60.0ft / 0.00m – 18.00m : Set the distance.
•The speakers that can be selected differ depending on the “Amp Assign” (vpage 121) and “Speaker Config.” (vpage 121) settings.
•Default settings :
Front L / Front R / F. Height L / F. Height R / Center / Subwoofer : 12.0 ft (3.60 m)
Surround L / Surround R / Surr. Back L / Surr. Back R : 10.0 ft (3.00 m)
•Set the difference in the distance between the speakers to less than 20.0 ft (6.00 m).
NOTE
Speakers set to “None” in “Speaker Config.” (vpage 121) are not displayed.
v See overleaf
version Basic
version Advanced
Information
DVD | 122 |