Connections

Important information

AV receiver

 

 

AUDIO

 

Connect this unit as follows before using. Make connections according to the equipment you are

L

L

L

connecting.

R

 

 

Some settings of this unit may be necessary depending on the connection method. Check each

R

R

 

 

 

connection item for more information.

Select the cables (sold separately) according to the components being connected.

ENGLISH

Simple version

NOTE

Do not plug in the power cord until all connections have been completed.

When making connections, also refer to the operating instructions of the other components being connected.

Be sure to connect the left and right channels properly (left with left, right with right).

Do not bundle power cords together with connection cables. Doing so can result in noise.

VIDEO

VIDEO IN

COMPONENT

VIDEO IN

Y

PB

PR

Basic version

Connecting an AV receiver

For connecting using an HDMI cable, see “Connect” (vpage 4). This section describes the connections not using an HDMI cable.

Connecting to an AV receiver with an analog 2-channel audio input terminal

This connection is recommended when the specifications of an AV receiver connected to the unit are as follows:

Not supporting HDMI input

Not supporting digital audio(coaxial) input

Select the connector to use and connect the device.

Cables used for connections

Audio and Video cable

Audio and Video

(White)

L

L

 

 

 

cable

(Red)

R

R

(Supplied)

(Yellow)

 

 

 

Video cable

 

Component video

(Green)

 

 

 

 

 

cable

(Blue)

 

 

(Sold separately)

(Red)

 

 

 

 

 

9

Advanced version

Information

Page 13
Image 13
Marantz 5411 10470 007M, UD5005 Connections, Important information, Connecting an AV receiver, Cables used for connections