ENGLISH
Network Setup | Default settings are underlined. |
Set Internet connection settings and
Setting items | Setting details |
|
|
Internet Connection | Enable : The Internet connection is to be used. |
Sets whether the Internet | Disable : The Internet connection is not to be used. |
connection is to be used |
|
or not. |
|
Information | Displays the network information shown below. |
Displays the network | • Address type |
information such as the IP | • IP Address |
address, subnet mask, etc. | • Subnet Mask |
| • Default Gateway |
| • Primary DNS |
| • Secondary DNS |
| General Setting |
|
|
Setting items | Setting details |
|
|
Proxy Setting | Disable : Does not use a proxy server. |
Setting for connecting to the | Enable : Uses the proxy server. |
Internet via a proxy server. | • Proxy host: If Enable is selected for Proxy Setting, enter the proxy host |
| from the virtual keyboard and press ENTER to register it. |
| • Proxy port: If Enable is selected for Proxy Setting, enter the proxy port |
| and press ENTER to register it. |
| Network proxy input screen (with virtual keyboard) |
General Setting
System |
| I | ||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Language | a | b | c | d | e | 1 | 2 | 3 | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Connection Test
Performs the network connection test.
Perform the Internet connection test.
•It is recommended to perform the connection test for the first Internet connection, or after the IP address or the settings for the network are changed.
•If connection is not completed, a message is displayed. Check the connection settings and connection environment.
| f | g |
| h |
| i |
| j | 4 | 5 |
| 6 |
| ||||
Ratings | k |
|
| l |
| m |
| n |
| o |
| 7 |
| 8 |
| 9 |
|
p |
|
| q |
| r |
| s |
| t |
| . |
| @ |
| 0 |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Network | u |
| v | w | x | y | z | !@#$ | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Back |
| Space |
| Enter |
| Clear |
| |||||||||
Others |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Select | ENTER |
| Confirm |
|
|
| RETURN | Exit | |||||||||
DHCP
Sets how to perform network configuration, automatically or manually.
Since the factory default setting is “Auto”, you do not need to set items such as the IP address if the DHCP server of the broadband router is set to “Enable”. Configure a proxy server if necessary.
Auto : Automatically configures the network via the DHCP function.
Manual : When connecting to a network that lacks the DHCP function, manually configure the following network settings. Consult with the ISP or your network administrator for what settings to make. After use i to clear value, use 0 – 9 to enter values and then press ENTER to finalize them.
•IP Address : Manually configure the IP address.
•Subnet Mask : If a xDSL modem or terminal adaptor is directly connected to the unit, enter the subnet mask provided by the ISP, usually in a document. Usually, “255.255.255.0” is set.
•Default Gateway : If the device is connected to a gateway (router), enter its IP address.
•Primary DNS : Enter the primary DNS.
•Secondary DNS : Enter the secondary DNS.
| Permitted : All Internet accesses from |
Limits the access rights for | Partial Permitted : Internet accesses from the certified |
the content on a | permitted. |
connection. | Prohibited : All Internet accesses from |
36
Remote control operation | Displaying the menu | Move the cursor | Decision the setting | Return to previous menu | |
buttons | Cancel the menu | (Up/Down/Left/Right) | |||
|
|
