ENGLISH
Audio Setting
Settings for audio output are made.
Audio Output | Default settings are underlined. |
|
|
Setting items | Setting details |
|
|
Coaxial | Bitstream : For selecting if the device connected to the unit supports |
For selecting the format | Dolby Digital or DTS Digital Surround. |
output from the digital audio | PCM : For selecting when the device connected to the unit does not |
output terminals. | support Dolby Digital or DTS Digital Surround. |
| Off : For outputting no audio signal from the digital audio output terminal |
| of the unit. |
| For converting audio signals, see “About digital signal audio output” |
| (vpage 49). |
HDMI | Bitstream : For selecting when the device connected to the unit supports |
For selecting the format | Dolby TrueHD/Dolby Digital Plus/Dolby Digital or |
output from the HDMI | Surround. The output format is automatically selected according to the |
output terminals. | audio format or the number of channels supported by the connected |
| HDMI device. |
| PCM : For selecting when a device connected to the unit does not support |
| Dolby TrueHD/Dolby Digital Plus/Dolby Digital or |
| Surround. |
| Off : For outputting no audio signal from the HDMI output terminal of the |
| unit. |
| For converting audio signals, see “Digital Audio Signal Output” |
| (vpage 49). |
| NOTE |
| If “BD audio mode” is set to “HD Audio Output” with MODE on the |
| remote control, BD secondary audio and interactive audio are not output. |
Setting items | Setting details |
|
|
Down Sampling | Refer to the operation manual for the device connected to the unit, and |
For selecting the sampling | make settings depending on the connected device. |
rate output from the digital | 48 kHz / 96 kHz / 192 kHz |
audio output terminal. | NOTE |
| |
| • For |
| kHz, |
| • If the connected device does not support the sampling rate of 96 kHz or |
| 192 kHz and the settings for the unit is made as 96 kHz or 192 kHz, much |
| noise may be generated from the connected device. |
DRC | Off : Dynamic range is not compressed. |
Compresses the dynamic | On : Dynamic range is compressed. |
range of Dolby TruHD/Dolby | Auto : Dynamic range of Dolby TrueHD audio is automatically compressed |
Digital Plus/Dolby Digital | according to the material. Audio of Dolby TrueHD only is compressed. |
Audio. | This setting compensates high volume to low and low volume to high |
| |
| when high volume is not desired at night. |
|
|
38
Remote control operation | Displaying the menu | Move the cursor | Decision the setting | Return to previous menu | |
buttons | Cancel the menu | (Up/Down/Left/Right) | |||
|
|
