Marantz 5411 10470 007M, UD5005 manual Adjusting the picture quality Picture control

Adjusting the picture quality (Picture control)

You can adjust the picture quality to your liking.

The adjusted values can be stored in Memory 1 through Memory 5.

1	Press PICTURE ADJUST.
	• The currently set status is displayed.
		Memory1
		3DNR
		BNR
		MNR
		Contract	0
		Brightness
		Gamma Correcti....

2 Press ui to select a memory number to be used, and then press ENTER.

3 Press ui to select an item then press ENTER or p.

4 Change the setting with ui.

•Refer to the table on the right for information on the different settings.

To finalize picture adjustments

Press PICTURE ADJUST after adjusting.

• The pop up menu of the picture adjustments is disappeared on the screen.

The picture adjustment settings are retained in memory even after the power is turned off.

ENGLISH

Setting items	Setting contents	Default
3DNR	0 – +3	0
Reduces noise in the entire picture.
BNR
Reduces the block noise generated by digital	0 – +3	0
processing.
MNR
Reduces the noise around the outline of an object	0 – +3	0
generated by digital processing.
Contrast	–6 – +6	0
Adjusts picture contrast.
Brightness	0 – +12	0
Adjusts picture brightness.
Gamma Correction
Changes the amount of gamma correction to
adjust overall brightness of a picture.	–4 – +4	0
Make Dark(–) / bright(+)
section easier to see.
Sharpness
Adjusts picture sharpness for the higher	–6 – +6	0
frequency range.
Hue (color tone)	–6 – +6	0
Adjusts the green and red color balance.
Chroma Level	–6 – +6	0
Adjusts the color density.
Setup Level z	0 IRE	7.5 IRE
Adjusts the black areas of the image.	7.5 IRE

z Effective only for the 480i video signal from the video output terminal.

23

Simple version

Basic version

Advanced version

Information