ENGLISH
General Setting
Settings for system, language, parental lock, network, etc. can be made.
System Setup | Default settings are underlined. |
Set the following settings.
•Screen saver settings
•Power saving mode settings
•HDMI control function settings
•Initialize settings
•Firmware update from the Internet
•
Setting items | Setting details |
|
|
Screen Saver | On : The screensaver function activates when stop or pause status |
Sets the screensaver. | continues for about three minutes. The screensaver function also activates |
| during playback of a CD, Super Audio CD or audio file when no operations |
| are performed for about three minutes. |
| Off : Does not use the screensaver. |
Auto Power Mode | On : This setting automatically sets the power to standby if any of the |
This setting automatically | following states continues for approximately 30 minutes. |
sets the power to standby. | • Disc not loaded |
| • Playback stopped |
| • Stopped due to the resume function |
Setting items | Setting details |
|
|
Initialize | Cancel : Does not initialize. |
All settings including audio | OK : Executes initialization. |
mode and picture quality are |
|
set to default settings. |
|
Firmware Update | Check for Update : Checks if a newer version of firmware exists. You |
Updates the firmware of the | can also check approximately how long it will take to complete an update. |
unit via the Internet. | If the firmware is already updated to the latest version, the firmware |
| updating operation starts after you press ENTER. |
| When updating starts, the power indicator lights red and the GUI menu |
| screen shuts down. |
| While updating, a rough estimate of remaining time is indicated on the |
| display. |
| When updating is complete the power indicator lights green and the |
| normal status is resumed. |
Update Notification | On : The message for updating is displayed on a television screen. |
Displays the message for | Off : The message for updating is not displayed on a television screen. |
updating on a television |
|
screen just after the power |
|
is turned on. |
|
| Off : Does not use the auto power mode. |
Power Saving | Power Saving Standby : This is the lowest power consumption mode. |
Sets to power saving mode | During standby, operations are not accepted via HDMI control. |
during standby. | Normal Standby : During standby, operations are accepted via HDMI |
| control. Power consumption is slightly higher at this time. |
BD Data Utility
Initializes the BD data stored in the
BD Data Information : The BD data used for
FMT BD Data : Initializes the space for BD data being used for
This operation deletes all data. When a USB memory device that stores the data is inserted, never execute this operation.
HDMI Control
Links the unit and a device connected with an HDMI cable that supports HDMI control.
On : Links with the device connected to HDMI.
Off : Disables the HDMI control function.
•For the HDMI control function to operate, it is necessary for the unit or
•Refer to “HDMI control functions” (vpage 21) for more information on HDMI control functions.
•After the “HDMI Control” setting has been changed, always turn off the power to the connected equipment and then turn it back on.
•Internal : The
•External : The USB memory device inserted in the unit is used.
If the capacity of
HDMI Power Off Control | On : Turns the unit’s power to standby through linkage to the TV. |
Links the power of the unit | Off : Does not turn the unit’s power to standby through linkage to the TV. |
and a device connected with |
|
an HDMI cable that supports |
|
HDMI control. |
|
34
Remote control operation | Displaying the menu | Move the cursor | Decision the setting | Return to previous menu | |
buttons | Cancel the menu | (Up/Down/Left/Right) | |||
|
|
