ENGLISH
Features
A Super Audio
The unit supports a variety of media and enables video and audio playback of your disc libraries with high quality (vpage 45 “Playable Media”).
Supporting the Network operations
•When the unit is connected to the Internet, Netflix and YouTube service can be used.
•Music, photos, video files stored on the device connected via the network can be played.
•When the unit is connected to the Internet, privileged video can be downloaded from the Internet site to the
3D ready
When the firmware for playing
Direct Mechanical Ground Construction, supporting
The disc mechanism that causes vibration is arranged at the center of the unit to transmit vibration out through the base, enabling video and audio playback of high quality.
Independent Block Construction for playing video and audio signals with high fidelity
The electronic circuits are separated to prevent electronic and electromagnetic noise caused by various electronic signals in the unit.
GUI equipped for good operability and visibility
vpage 33 “GUI menu operation”
HDMI control
vpage 21 “HDMI control functions”
Cautions on handling
•Before turning the power switch on
Check once again that all connections are correct and that there are no problems with the connection cables.
•Power is supplied to some of the circuitry even when the unit is set to the standby mode. When leaving home for long periods of time, be sure to unplug the power cord from the power outlet.
•Image persistence (image burn-in)
Do not leave still images of the disc menu, the unit menu, etc., displayed on the TV screen for long periods. This can result in image persistence (image
•About condensation
If there is a major difference in temperature between the inside of the unit and the surroundings, condensation (dew) may form on the operating parts inside the unit, causing the unit not to operate properly.
If this happens, let the unit sit for an hour or two with the power turned off and wait until there is little difference in temperature before using the unit.
•Cautions on using mobile phones
Using a mobile phone near this unit may result in noise. If that occurs, move the mobile phone away from the unit when it is in use.
•Moving the unit
Be sure to remove a disc, turn off the power and unplug the power cord from the power outlet. Next, disconnect the connection cables to other system equipment before moving the unit.
•About Care
•Wipe the cabinet and control panel clean with a soft cloth.
•Follow the instructions when using a chemical cleaner.
•Benzene, paint thinner or other organic solvents, as well as insecticide, may cause material changes and discoloration if brought into contact with the unit, and should, therefore, not be used.
•Sufficiently ventilate the place of installation
If the unit is left in a room full of the smoke from cigarettes, etc., for long periods of time, the surface of the optical pickup could get dirty, in which case it will not be able to read the signals properly.
2
