UTILITY BASKET FOR LOWER
RACK (select models)
This basket is designed to load miscellaneous items like silverware, cooking utensils, knives and other larger utensils.
LOADING
Adjustable rack (select models)
To lower the rack:
➢ Pull the rack fully out.
➢ Place hands on each adjuster.
➢ Press down on the top blue button and push down (the button will slide towards the center of the rack).
➢ The rack will come to a stop when it is in position.
NOTE |
The Adjustable Upper Rack (select models) and Adjustable Middle Rack can be raised or lowered to accommodate taller plates, platters, pans, etc. in the upper, middle or lower racks. Full size dinner plates can be loaded in the upper rack if it is in the lower position.
To raise the rack:
➢Pull the rack fully out.
➢Place hands on each adjuster.
➢Lift up both sides until rack comes to a stop.
❚The dishwasher will not operate correctly if the upper rack wash arm connection is not aligned with one of the water inlet holes on back wall.
❚The left and right side adjusters must both be in the upward or downward position for proper connection.
Removing the upper and middle racks
The racks can be removed when tall or oversized items need to be loaded into the middle or lower rack. Unload the rack prior to removing.
TO REMOVE:
➢Roll the rack 1/3 to 1/2 of the way out.
➢Remove the plastic rack stop from the end of each track. To remove each plastic rack stop, push inward
(towards the rack) on the ridged area of the rack stop. The rack stop will snap open and can be easily removed by pulling straight out. Take care to support the track while removing rack stops.
➢Roll the rack all the way out of the track and remove from the dishwasher.
➢Reverse the above procedure to replace the rack into the dishwasher.
Rack Stop |
4
16021814 Rev. 0 | ©2002 Maytag Appliance Sales Company |
