McIntosh MS300 user manual Creating CDs

assemble an “image” of all songs on its internal hard drive. Note: If you selected any songs which are from changer based CDs, this process may take a while to complete as these songs must be read in real-time.

7.After all of the songs have been read, the MS300 will ask if you want to add any more tracks to the CD. Select ADD MORE if you do want to add more tracks or select DONE to continue creating the CD.

8.When the MS300 has added all of your songs and finished creating the new CD image, it will eject the CD tray and ask you to insert a blank CD.

9.Insert a blank CD-R or CD-RW disc and close the CD tray by pressing the Eject button on the front panel. Note: You must use royalty paid blank CDs which are typically marked as “audio” or “music” CDs when creating and Audio CD. Data CDs typically used for computers can be used for data mix CDs.

10.The Music Record Progress – CD Write screen now appears as the CD image is written to the blank CD.

11.When the CD is complete, the new disc you created will be ejected. Remove the disc and close the CD tray.

CREATING CDs

MS300 User’s Manual

PAGE 59