McIntosh MS300 user manual Connecting Sony DVP-CX777ES CD/DVD Changers CDs Only

Manual	MUSIC ON THE MS300
MS300 User’s

•Kenwood DV-5900M and DV-5050M CD/DVD Changers (CDs only)

•Pioneer DV-F07 CD/DVD changer (CDs only)

Note: All three changers must be from the same manufacturer. For example, you can not use 1 Sony and 2 Kenwood changers at the same time. Also, you can not mix Sony CD and Sony CD/DVD changers.

Connecting Sony DVP-CX777ES CD/DVD Changers (CDs Only)

The MS300 requires that you connect each changer to the back panel using audio and control cables.

Follow these steps to connect your Sony CD/DVD changers to your MS300:

1.An RS-232 serial null modem cable with female DB-9 connectors on each end is required for connecting a Sony CD/DVD Changer.

2.Connect one end of the RS-232 serial cable into Communication Port number 1, on the back of your MS300.

3.Connect the other end of the RS-232 serial cable into the “RS-232C” port on the back of your changer.

4.Locate the stereo RCA audio patch cable.

5.Connect one end of the RCA audio cable into the Analog In jacks number 1 on the back of your MS300

6.Connect the other end of the RCA audio cable into the Analog Line Out jacks on the back of your changer.

PAGE 21