Manual | USER PREFERENCES |
MS300 User’s |
|
Restarting the System
There are two ways of manually performing a full restart or reboot of the MS300 system, one using the front panel power button and the other using the Restart System menu.
Follow these steps to restart the system using the front panel Power Button:
1.Press and hold the power button for 4 seconds.
2.When the LED on the front panel begins to flash, release the power button.
3.When the LED on the front panel glows solid RED (standby mode), the MS300 is ready to use.
4.Press and release the Power button to turn on the MS300.
Follow these steps to restart the system using Utilities menu:
1.Press the SETUP key on the remote to display the Setup menu.
2.Select the UTILITIES menu.
3.Select the RESTART SYSTEM menu.
4.Confirm that you want to restart the system and select the RESTART button.
5.When the LED on the front panel glows solid RED (standby mode), the MS300 is ready to use.
6.Press and release the Power button to turn on the MS300.
PAGE 92
