Manual

USER PREFERENCES

MS300 User’s

 

PAGE 62

SETTING USER PREFERENCES

User preferences are available to specify global configuration options and preferred system settings. Press the SETUP key on the remote control to display the Setup Menu. Use the navigation keys on the remote control (up, down, left, and right) to highlight and select any menu item.

SETTING THE SCREEN SAVER PREFERENCES

Screen Savers are provided for each source mode. Screen Savers provide two important functions, to prevent a static image from being displayed on the video output device for extended periods of time and to provide useful information to the user when activated.

Follow these steps to set your screen saver preferences:

1.Press the SETUP key on the remote to display the Setup menu.

2.Select the GENERAL Menu.

3.Select the SCREEN SAVER Menu.

4.Select your Screen Saver Preferences.

Activation Idle Time

You can specify the amount of idle time that the MS300 will wait before activating the screen saver from 1 to 60 minutes.

Warning: Some televisions and plasma monitors are more susceptible to screen burn-in than others, therefore, we recommend using a low activation time (like 1 minute) to reduce the risk of burn-in.

Mode

Select either the Normal mode or Product Demonstration mode. The Normal mode displays the current title or station information while the Product Demonstration mode is intended for retail product demos during idle time.

Page 66
Image 66
McIntosh MS300 user manual User Preferences, Activation Idle Time