Network (JPEG2000+H.264) | CHAP. 3 Installation |
Network Stand Alone DVR
1) Rack mount
1. Remove 4 bolts on each side cap to install rack mount.
2.Attach rack mount bracket to DVR.
3.Attach DVR with rack mount bracket to 19” rack.
2)HDD
Connection of HDD Cable | HDD fix |
MAIN BOARD | I/O BOARD | |
| ||
HDD1 HDD2 |
|
|
HDD1 | HDD2 |
|
(MASTER1) | (MASTER2) | |
|
| |
|
| (MASTER) |
|
| I/O BOARD |
| MAIN BOARD |
|
x x | x x | x x |
x x | x x | x x |
1.Connect Main Board and HDD using SATA DATA cable and HDD power cable.
2.When you use just 1 HDD, install the HDD onto HDD1 location.
3.When you use 2 HDDs, install the first HDD onto HDD1 location and then install the second HDD onto HDD2 location in order.
4.Stick the HDD absorber (included in package) on the bottom of case and then install the HDD on top of them by using the bolts (included in package).
5.Screws must be inserted from outside of the case bottom.
10
