TV OPERATION
Make sure the main power switch is on as shown on page 14, then press the POWER button 1 to turn on the TV; the POWER indicator will light green. Press the TV/VIDEO button 2 repeatedly to select the TV mode.
OPTIONS
AIR: If using a
VHF/UHF
antenna.
CATV: If using Cable
TV.
Set the AIR/CABLE (SYSTEM) option as described on page 22.
Adjust the volume level by pressing the VOLUME UP/Navigation Right 1 or VOLUME DOWN/Navigation Left 2 button. The volume level will be indicated on the screen by a blue bar.
NOTES:
• When TV/CATV is set to TV, only channels up to 69 can be selected. When set to CATV, channels up to 125 can be selected.
• If an invalid channel is selected, the display will revert to the original channel.
3
4
21
For proper operation, before selecting channels, they must be set into the TV’s program memory, see page 22. Press and release the CHANNEL/Navigation UP 1 or DOWN 2 button. The TV automatically stops at the next channel set into memory. This will not operate if channels are not set into memory.
Direct Program Selection buttons
Use these buttons to select a channel. The channel number will appear at the top right corner of the screen.
• For Channels 01 through 99, press the two digits in order.
• For Channels 100 through 125, press the
FAQs:
Why do I only receive 69 channels, when my cable goes much higher? SYSTEM option must be set to CATV when using cable, see page 22.
Why are some channels scrambled?
You must subscribe to these channels through your cable company.
24
