SETTING THE MENU (CONTINUED)
FEATURE SETUP
1 
2 | 3 |
4 |
|
Make sure the main power switch is on as shown on page 14, then press the POWER button 1 to turn on the TV; the POWER indicator will light green. Press the ENTER/MENU button 2; the Video Menu screen will appear. Press the CHANNEL UP 3 or DOWN 4 button to select FEATURE, then press the ENTER/MENU button 2 to select it.
4 2 | 13 |
5 |
|
Press the CHANNEL/Navigation UP 1 or DOWN 2 button to select COLOR MODE, then press the ENTER/MENU button 5 to select it. At the next screen, Color Temp will be selected. Adjust the overall “Color Temp” to User, Cool, Normal or Warm using the VOLUME UP/Navigation Right 3 or VOLUME DOWN/Navigation Left 4 button.
4 2 | 13 |
5 |
|
You can also adjust each color temperature separately by selecting the desired color using the CHANNEL/Navigation UP 1 or DOWN 2 button, then adjusting the setting using the VOLUME UP/Navigation Right 3 or VOLUME DOWN/Navigation Left 4 button. Press the ENTER/MENU button 5 to confirm the setting.
3 1
2
When done, select RETURN using the CHANNEL/Navigation UP 1 or DOWN 2 button and press the ENTER/MENU button 3.
4 2
13
Press the CHANNEL/Navigation UP 1 or DOWN 2 button until 3D NR is selected. Set the desired 3D noise reduction setting
NOTE: This setting is not be available for PC(VGA) mode.
20
4 2
13
Press the CHANNEL/Navigation UP 1 or DOWN 2 button until ASPECT RATIO is selected. Set the aspect ratio (Full, Letter Box, LB to Full, Zoom out, Zoom In 1 or Zoom In 2) using the VOLUME UP/Navigation Right 3 or VOLUME DOWN/Navigation Left 4 button.
NOTES:
• This setting is not available for PC (VGA) mode.
• For Component (YPbPr) mode, the Letter Box and Zoom out selection will not be available.
