VCR CONNECTIONS
CONNECTION USING COAXIAL CABLE:
Follow the instructions below to connect a VCR to your television using a 75 ohm coaxial cable. (CABLES NOT INCLUDED.)
REAR OF TV | VCR |
INCOMING CATV CABLE | |
| From VCR OUT jack |
1.Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR.
2.Connect a 75 ohm coaxial cable from the VCR’s 75 Ohm OUT jack to the ANT jack on the rear of the TV.
3.Press the TV/VIDEO button until a channel appears on the TV screen and press PLAY on the VCR to watch a tape.
CONNECTION USING AUDIO/VIDEO CABLES:
Follow the instructions below to connect a VCR to your television using Audio/Video cables. (CABLES NOT INCLUDED.)
1. | Connect the cable, satellite or incoming |
| antenna to the VHF/UHF IN jack on the |
| rear of the VCR. |
2. | Connect the left and right audio cable from |
| the VCR’s Audio OUT jacks to the TV’s |
| audio left and right AUDIO IN jacks. |
| Connect the VCR’s video OUT jack to the |
| TV’s VIDEO IN jack. |
3. | Press the TV/VIDEO button until AV |
| appears on the TV screen and press PLAY |
| on the VCR to watch a tape. |
FAQ: |
|
My VCR has only 1 Audio jack, but this TV has two Audio input jacks, how do I connect it?
Simply connect it to the “L (Mono)” Audio input jack, but the sound will be monaural.
10
