1
2 
Press the POWER button on the remote, or front of the unit, to turn on the unit; the1 POWER indicator will light green. Press the TV/AV button repeatedly to select the
TV mode.2
OPTIONS
TV: If using a
VHF/UHF
antenna.
CATV: If using Cable
TV.
Change the Antenna option to select between TV or CATV. Select TV if using VHF/UHF antenna, and select CATV if using Cable TV (see page 21, steps 1 and 2).
|
|
|
|
| 1 |
|
|
| 2 |
|
| 2 |
|
|
| 1 |
|
|
| |
|
|
|
|
|
| |
|
|
|
|
| 3 |
|
|
|
|
|
| 4 |
|
Adjust the volume level by pressing the VOLUME Up 1 or | For proper operation, before selecting channels, they must | |||||
Down | 2 | button. |
| be set into the unit’s Program memory, see page 21. | ||
|
| Press and release the CHANNEL Up 1 or Down 2 button. | ||||
|
|
|
| The unit automatically stops at the next channel set into | ||
|
|
|
| memory. |
| |
|
|
|
| Direct Program Selection/Number buttons |
| |
|
|
|
| Use these buttons to select a channel. |
| |
NOTES: |
| • | For Channels 1 through 9, press | |||
| • | For Channels 10 through 99, press | 4 once, | |||
• When ANTENNA option is set to TV, only channels up |
| then enter the 2 digit channel number in order. | 4 twice, | |||
• For Channels 100 through 125, press | ||||||
to 69 can be chosen. When set to CATV, channels up |
| then enter the 3 digit channel number in order. |
| |||
to 125 can be chosen. |
|
|
|
| ||
FAQs:
Why do I only receive 69 channels, when my cable goes much higher?
The TV/CATV option must be set to CATV when using cable, see step 2 above.
Why are some channels scrambled?
You must subscribe to these channels through your cable company.
HEADPHONE JACK (SIDE OF UNIT)
For private listening, connect 3.5mm (32 ohm) stereo headphones (not included) to this jack. The speakers are automatically disconnected when the headphone plug is inserted in the jack.
28
