Memorex MVDR2100 manual Connecting the DVD to a Home Theatre System, Front Left Speaker Television

Models: MVDR2100

1 55
Download 55 pages 21.54 Kb
Page 14
Image 14

CONNECTION-OUT (CONTINUED)

CONNECTING THE DVD TO A HOME THEATRE SYSTEM

From

Video Out

OR DigitalFrom

Out

 

 

 

 

Use a Coaxial cable or Optical cable to connect the DVD Recorder and the Coaxial/Optical Digital audio input

Video Cable (Included)

 

jacks (cables are not included)

 

 

To Digital

 

 

 

To Video

 

Audio Input

 

 

 

 

9

 

Place the subwoofer, front, rear and center

 

Input

 

 

 

speakers in locations as shown/described

 

 

 

 

 

here. After correctly positioning the speakers,

1

2

3

 

5

perform the Tone Test on the AV Amplifier and

4

adjust the volume controls until the desired

 

sound is achieved. For best results, sit in the

 

 

 

 

 

viewing position and have someone adjust the

 

 

 

 

 

volumes for you; this will enable you to set the

 

 

 

 

 

optimal levels.

7

6

1.Front Left Speaker

2.Television

3.Center Speaker-can be located on top or below the Television.

4.Sub-woofer-can be located anywhere in the room.

5.Front Right Speaker

NOTE:

The rear speakers can also be located on the side wall facing the viewing position and

8each other. Make sure the viewing position is located between the 2 speakers in this case. Experiment to find optimal position.

6.Viewing/Listening Position-The best listening position is obtained by positioning the chair, sofa, etc. in the middle of all the speakers.

7.Rear Left Speaker

8.Rear Right Speaker

9.AV Amplifier w/Dolby Digital Decoder/DTS Decoder

NOTES FOR CONNECTING TO A HOME THEATER SYSTEM:

If your TV has a Component input, connect the DVD recorder with the component cable for best results, otherwise use the S-Video or Video OUT jack(s) on the DVD recorder.

Set the TV’s TV/VIDEO button or switch to the VIDEO setting.

When connecting the DVD, refer to the owner’s manual for the TV and the audio system, as well as this manual.

When connecting, make sure the power is off and all units are unplugged before making any connections.

Connect the DVD recorder to your TV directly. If you connect the DVD recorder through a VCR, the playback picture will be distorted because DVD video discs are copy protected.

If using a TV with a blue screen option, turn the option off, on the TV for best results.

If you place the DVD recorder near a tuner, the radio broadcast sound might be distorted. In this case, move the DVD recorder away from the tuner.

13

Page 14
Image 14
Memorex MVDR2100 manual Connecting the DVD to a Home Theatre System, Front Left Speaker Television