CONNECTION-OUT
CONNECTING THE DVD TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS
To Audio In
To 
Video In
Video Out | Video Cable (Included) |
From Audio Cable (Included) | |
From |
|
Audio
Out
NOTES FOR CONNECTING TO A TV:
•If your TV has a Component input, connect the DVD recorder with the component cable for best results, otherwise use the
•Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
•When connecting the DVD, refer to the owner’s manual of the TV, as well as this manual.
•When connecting the DVD to the TV, make sure the power is off and both units are unplugged before making any connections.
•If your TV only has one audio input, the use of a “Y” connector may be necessary. Visit your local electronics supply store.
•Connect the DVD recorder to your TV directly. If you connect the DVD recorder through a VCR, the playback picture will be distorted because DVD video discs are copy protected.
•Connect a cable, etc. signal as described on the top of page 9 to use the tuner capabilities of this unit and one of the OUT video connections on the CONNECTION pages to play a disc.
10
