
SPECIAL PLAYBACK
TO VISUALLY SEARCH FOR
DESIRED POINTS
When either the F.FWD or REW button is pressed in the PLAYBACK mode, the speed search picture will appear. The CUE indicator or the REV indicator will light in the display for about 4 seconds. When pressed twice, the search picture will increase speed. Speed search time depends upon the speed used (SP, LP or SLP) during recording.
TO WATCH A STILL PICTURE
Press the PAUSE/STILL button in the PLAYBACK mode. The PLAY indicator will flash in the display for about 4 seconds. Press the PAUSE/STILL button again to resume normal playback.
FRAME BY FRAME ADVANCE
Press the SLOW button during STILL playback. The still picture will advance by one frame each time you press the button. Hold the button for continuous frame by frame viewing.
Press the PAUSE/STILL button again to resume normal playback.
NOTES: • A few noise bars will appear on the picture during SPEED SEARCH and STILL.
•The audio output is muted during SPEED SEARCH, STILL, FRAME ADVANCE and
SLOW MOTION.
•To prevent damage to the tape, special playback is automatically changed to the PLAYBACK mode after 5 minutes.
SLOW MOTION PLAYBACK
Press the SLOW button in the PLAYBACK mode. Playback will proceed at 1/10th of the normal speed. The SLOW indicator will light in the display for about 4 seconds. Press the PLAY button again to resume normal playback.
NOTE: SLOW TRACKING AND VERTICAL LOCK ADJUSTMENT
If noise bars appear in the picture during slow motion, press the TRACKING/SET + or – button to reduce the noise bars.
If the still picture jitters excessively, press the TRACKING/SET + or – button to stabilize the still picture.
TO WATCH A TAPE REPEATEDLY
CHECK BEFORE YOU BEGIN
•Turn ON the TV and set to the video channel 3 or 4.
•Turn ON the VCR POWER button.
•Press the TV/VCR selector button to select the VCR mode.
When a TV is connected with an audio/video cable, turn the TV and this VCR on, and select the video input mode on the TV.
1 Press the MENU button. |
| MENU |
| ||
| CLOCK SET |
| |||
Press the TRACKING/SET + |
| TIMER REC SET |
| ||
|
| ||||
|
|
|
|
| |
or – button to select the AUTO |
|
| AUTO REPEAT ON | OFF | |
|
| ||||
|
| CH SET UP |
| ||
REPEAT option. |
|
|
| LANGUAGE/IDIOMA/LANGUE | |
|
|
| |||
|
|
| NO NOISE BACKGROUND | ||
|
|
| |||
|
|
|
| ON | OFF |
2 Press the ENTER button to |
| MENU |
| |
|
|
|
| |
select the ON position. |
| CLOCK SET |
| |
| TIMER REC SET |
| ||
|
| |||
3 Press the MENU button. |
|
| AUTO REPEAT ON | OFF |
|
| |||
|
| CH SET UP |
| |
|
| LANGUAGE/IDIOMA/LANGUE | ||
|
| |||
If you press the PLAY button, the |
|
| NO NOISE BACKGROUND | |
|
|
| ||
tape will play over and over until |
| ON | OFF | |
|
the repeat mode is canceled.
" " will appear if you press the CALL button. To cancel, press the CALL button again.
NOTE: To cancel repeat mode, follow the above steps 1 and 2, then press the ENTER button to select the OFF position. Press the MENU button to return to the TV.
USING ZERO RETURN
The zero return function provides a convenient method of rapidly returning to the starting point of recording or playback. The starting point can be indexed for any location on the tape by pressing the COUNTER RESET button and ZERO RETURN button.
1Press the CALL button to display the counter on the screen. (When loading a cassette tape, the clock will change to the counter automatically in the display.)
2Before playback or recording, press the COUNTER RESET button to set the counter to "00:00:00".
3Begin playback or recording.
4Press the STOP button when playback or recording is finished.
5Press the ZERO RETURN button. The tape will rewind and automatically stop at the "00:00:00" position.
RECORDING A TV
PROGRAM
RECORDING AND VIEWING THE SAME TV PROGRAM
CHECK BEFORE YOU BEGIN
•Turn ON the TV and set to the video channel 3 or 4.
•Turn ON the VCR POWER button.
•Press the TV/VCR selector button to select the VCR mode.
When a TV is connected with an audio/video cable, turn the TV and this VCR on and select the video input mode on the TV.
1Load a cassette tape with the erase prevention tab intact. The VCR will automatically
turn on. The clock display will change in the counter display.
2 Press the SPEED selector button to select the desired tape speed SP or SLP.
The counter and SP or SLP will appear on the screen for
18 |
about 4 seconds.
00 : 00 : 00 SP
4E30401A E | 18 | 17/04/2001, 14:01 |