12
CRADLE INSTALLATION TO THE HOST DEVICE
6. Turn on the host device.
7. Establish communication between the scanner and cradle.
See page 15 for complete instructions on Establishing Bluetooth
Communication between the scanner and cradle.
As a default, the MI9535-538 leaves the factory with USB Keyboard
Emulation Mode enabled. Scan the following bar code to configure
the MI9535-538 for USB Serial Emulation Mode.
³316460
The scanner must be charged for a minimum of 3 hours before the
scanner can be placed in full operation for the first time. After the
initial preparation charge of 3 hrs, the battery will only require
2.5 hrs to come to a full charge when it gives a Low Power warning
(see page 18).