20
THE MI9535-5XX RECEIVER / CHARGER CRADLE
Communication Protocols
The MI9535-5xx cradle works as a receiver and a charger for the MS9535.
Receiver
Once Bluetooth communication has been established between the scanner and
cradle, the cradle will act as a receiver for the barcode data transmitted from the
scanner. The cradle then transmitts the data to the host. Metrologic provides
several versions of the cradle to meet a variety of host interfaces. The following
chart lists all available cradle versions and their default communication protocol.
Cradle
Version
Identifier
(xx)
Communication Protocol(s)
14 Full RS232
41 RS232 / Light Pen Emulation
47 Receiver / Charger Cradle, Keyboard Wedge
38 Low Speed USB
Keyboard Emulation Mode or Serial Emulation Mode**
MI9535-5
11 IBM and RS232 Transmit / Receive
MI9535C5 40 Full Speed USB with external Power Supply
MI9535D5 40 Full Speed USB with power from Register
** Configurable for Keyboard Emulation Mode or Serial Emulation Mode.
The default setting is Keyboard Emulation Mode.
Charger
As a charger, the cradle recharges the scanner whenever it is set into place.
Even if the scanner’s battery is full, the cradle will continue to supply power to the
scanner. To order a cradle with charging capabilities only (MLPN 46-46772),
contact a Metrologic Customer service representative at 1-800-ID-METRO or
1-800-436-3876.