23
SCANNER OPERATION
Indicators
Visual
The MS9535 has three LED indicators (blue, white and amber) located on the
head of the scanner. When the scanner is in operation, the flashing or stationary
activity of the LEDs indicates the status of the scanner and the current scan.
Blue, White & Amber LEDs are off
The scanner is not receiving power from the cradle or the scanner’s
internal battery.
The scanner is in full sleep mode. Press the CodeGate button to
wake the scanner from full sleep mode. The blue LED will start to
flash as the unit exits full sleep mode.
Steady Amber
After establishing communication, when the scanner is put into the
cradle and the battery has been fully charged, the amber LED will
remain steady.
If the communication is not established, when the scanner is put into
the cradle, the amber LED will stay on after a short delay.
Steady Blue
When the laser is active, the blue LED is illuminated. The blue LED
will remain illuminated until the laser is deactivated.
Steady Blue and Single White Flash
When the scanner successfully reads a bar code, the white LED will
flash, the blue LED remains steady and the scanner will beep once.
If the scanner reads the bar code successfully at a relatively long
distance but still within the 10-meter operation range, the white LED
may flash after a short delay.
Steady Blue and Steady White
After a successful scan, the scanner transmits the data to the cradle.
If the cradle is not ready to accept the information, the scanner’s
white LED will remain on until the data can be transmitted or until a
communication time-out occurs.