35
DEFAULT SETTINGS - COMMUNICATION PARAMETERS
Many functions of the scanner and cradle can be “configured” – that is, enabled or disabled. The scanner and cradle are shipped from the factory configured to a set of default conditions. The default parameter has an asterisk (*) in the charts on the following pages. If an asterisk is not in the default column then the default setting is OFF or DISABLED. Every communication does not support every parameter. If the communication supports a parameter listed in the charts on the following pages, a check mark will appear.
Parameter Default RS232 Light
Pen
IBM
46XX KBW USB
Normal Scan Mode * 9 9 9 9 9
Continuous Scan Mode 9 9 9 9 9
Blinky Scan 9 9 9 9 9
Continuous Blinky Scan 9 9 9 9 9
Custom (one shot) Scan 9 9 9 9 9
Long-Range In-Stand * 9 9 9 9 9
Short-Range In-Stand 9 9 9 9 9
Long-Range Out-of-Stand * 9 9 9 9 9
Short-Range Out-of-Stand 9 9 9 9 9
CodeGate Active In-Stand 9 9 9 9 9
CodeGate Inactive In-Stand * 9 9 9 9 9
CodeGate Active Out-of Stand * 9 9 9 9 9
CodeGate Inactive Out-of Stand 9 9 9 9 9
UPC/EAN * 9 9 9 9 9
Code 128 * 9 9 9 9 9
Code 93 * 9 9 9 9 9
Codabar * 9 9 9 9 9
Interleaved 2 of 5 (ITF) * 9 9 9 9 9
MOD 10 check on ITF 9 9 9 9 9
Code 11 9 9 9 9 9
Code 39 * 9 9 9 9 9
Full ASCII Code 39 9 9 9 9 9