REAR UNLOAD DRIVE COUPLER
WARNING: DISCONNECT PTO DRIVE SHAFT AND HYDRAULIC HOSES (RELIEVE HYDRAULIC PRES- SURE) BEFORE CLEANING, ADJUSTING, LUBRICATING OR SERVICING THIS FORAGE BOX. FAILURE TO HEED MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH.
STEP 1
Install Coupling Plate and lynch pin onto the large gear- box assembly on the splined shaft at the REAR of the for- age box.
(Shield Removed For Illustration Purposes Only)
COUPLING PLATE
QUILL ZERK
STEP 2
IMPORTANT! (MUST PERFORM)
Install sleeve spacer and lynch pin onto the large gear- box assembly, splined shaft at the FRONT of the forage box. The internal splined shaft will be idling in reverse and the gearbox quill zerk must be greased daily.
SLEEVE SPACER
(Shield Removed For Illustration Purposes Only)
WARNING: DO NOT OPERATE WITHOUT ALL SHIELDS, GUARDS AND COVERS INSTALLED. FAILURE TO HEED MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH.
3200 & 4200 Series |
|