Meyer 4222, 4218, 4220 GATE 3100/3200/4100/4200 BOX, Gate Delay Adjustments, 3200 & 4200 Series

GATE

3100/3200/4100/4200 BOX

OIL CAPACITY

WITH 6” OF RAM ROD SHOWING

FILL TANK TO TOP WITH LITE

HYDRAULIC OIL.

GATE DELAY ADJUSTMENTS

When the gate is completely closed (Tight to rear upright) cable and eyebolt assembly should be adjusted so cable has no slack. Cable should be tight but not overtightened. If cable and eyebolt is overtightened lower cylinder will trip out of the L-shaped slot on the lower bracket too soon and the gate will try to close before the cylinder is stroked out. If the cable and eyebolt is too loose the lower cylinder will not trip out of the L-shaped slot and the cylinder will reach its maximum stroke and the gate will still not be in the closed position. The gate will be held open by the top cylinder bracket and the bracket may become damaged over time. Eyebolt and cable will need to be adjusted periodically to maintain proper operation.

KEY	PART NO.	DESCRIPTION
	4200-GATE	Gate Delay Closing Option
1	25-8092-1	Gate Regulator Top Shaft
2	25-8095	Oil Reservoir Assembly
3	25-8096	Gate Release Trip Arm Assembly
4	25-8097-1	Lower Sleeve Spacer
5	25-8099	Top Cylinder Bracket
6	25-8100	Lower Mount Plate Welded As-
		sembly
7	30-0015	1/4” Fitting x 90 Degree Elbow
8	25-8098	Cable Eyebolt Assembly
9	55-0093	Hydraulic Cylinder
10	55-0094	Flow Control
11	55-0095	1/8” to 3/8” NPT Reducer
12	55-0096	3/8” NPTF x 90 Degree Male Pipe
		Elbow
13	55-0097	3/8” to 3/8” Nipple

KEY	PART NO.	DESCRIPTION
14	735-.25CT	1/4” Copper Tubing (.25 Ft. Req)
15	823-19-2	3/16 x 2” Cotter Pin
16	952-0001-7	Nylon Tie Strap
17	25-8101	Ground Control Rod Assy. W/Grip
18	51-0007	Handle Grip
19	933-3804	5/16 x 4” Eyebolt
20	825-25-1Z	1/4x1" Self Tapping Screw
21	25-8102-2	Drag Sleeve (Hose)

3200 & 4200 Series -- 60 --