Meyer Front and Rear Unload Forage Boxes with Indpendent Outfeed Clutch 21, 3200 & 4200 Series

END OF CROP CLEANUP AND MAINTE- NANCE

Allow box to completely clean out last load of forage. Clean out all forage material from inside the box, roof and on the outside of the box. Clean the front cross con- veyor on the top pan and in the lower pan (chain return) area. Clean out the clean-out panel. Clean out the de- flector shield at the rear of the box, both inside and out- side.

It is recommended to lube the forage box before storage to exclude moisture from bearings. Apply oil to roller chain drives and to the main apron chains and cross con- veyor chains. Also, new or used oil is recommended to be applied to the floor and inside of the box walls.

It is also a good time to inspect all adjustments and check for parts that need repair or replacement. Performing these tasks now will guarantee that the forage box is ready for use at the beginning of the next season.

BOTH SIDES

LUBRICATION DIAGRAMS (Shields Removed for Illustration Purposes Only)

3200 & 4200 Series -- 21 –