STEP 3
Move the Independent Outfeed Clutch lever to “STOP” (UP).
NOTE: The PTO driven independent outfeed clutch can be used to clean out accumulation of forage from the front unit cross conveyor without changing the drive coupler for forage box rear un- loading.
INDEPENDENT OUTFEED CLUTCH LEVER
(Shield Removed For Illustrated Purposes Only)
PTO DRIVE REAR UNLOAD ENGAGE LEVER
HYDRAULIC CHECK VALVE AT REAR OF BOX
STEP 4a (PTO DRIVE) or
Move the lever for PTO drive rear unloading to the “ENGAGE” position (DOWN).
STEP 4b (HYDRAULIC DRIVE)
Couple both supply and return line hydraulic hoses of the forage box to the hydraulic outlets of the towing trac- tor.
NOTE: The rear unloading gearbox and hydraulically driven motor, hydraulic return line features a check valve to protect and prevent any accidental damage by mistakenly, or incorrectly coupling hydraulic hoses to the tractor. The check valve is equipped with a re- verse flow feature which will allow the box to run in a reverse direction for drive plate removal. Reverse hy- draulic flow approximately
LOADING!
Operating Procedures: See “REAR UNLOAD OPERATION” (HYD or PTO) Page 18
3200 & 4200 Series |
|