
Pipe O.D. | 58.0 |
Wall thick | 4.0 |
Lining | 0.0 |
Wall | MILD STEEL |
Lining | |
Fluid | WATER |
Read flow |
|
Exit |
|
|
|
Note:
•Site Zero is always the QUICK START data and cannot be changed.
•Changing the data in any site is automatically saved when leaving this menu. Data will have to be
List Sites
Selecting LIST SITES allows the user to view the names of up to 20 sites, numbers
Pressing ENTER will display sites from
1 site not named
2 site not named
3 site not named
4 site not named
5 site not named
Press ENTER to continue
Site Number
Site number allows the user to enter the number of the site data that you wish to be displayed. If the site has not been used then no data would be stored. You can now enter new application data.
Site Name
Site name allows the user to edit or enter a site name. Use the scroll keys to move the cursor to the letter/figure required and press ENTER to select. Press zero, to return the instrument to VIEW/EDIT SITE DATA. The new site name will appear on the display.
SCROLL & ENTER select for space, 0 to end
abcdefghijklmnopqr
stuvwxyz01234567890
>……...............<
Dimension Units
Dimension units allow the user to switch between millimetres and inches. The electronics converts all the application data in a particular site.
Pipe wall/lining thickness and Pipe wall/lining material can now be changed as required. Lining material is ignored if a lining thickness has not been entered. A selection of pipe wall/lining materials will be displayed when these options are selected.
Fluid type
Fluid type allows the user to scroll through a selection of fluid types. Select OTHER in the menu if a liquid is not mentioned.
Select fluid type. When Other (m/s) is selected the user must enter the liquid sound speed in m/s. This can be supplied by Micronics or found in the back of the manual under Liquid Sound Speeds.
10