CONTENTS | Page No |
| |
Introduction | 2 |
Fast track procedure | |
Parts and accessories | 4 |
Battery and Charger | 5 |
Transducers/Separation Distance/Fluid Types | 6 |
Programming – Main Menu | 6 |
Main Menu – Quick Start | |
Main Menu – View/Edit site data | |
Main Menu – Select sensor mode | 11 |
Main Menu – Set up Instrument | 12 |
Pulse output/ Display/Signal Enhancement | 12 |
Keypad Options | 13 |
Cutoff (m/s) | 13 |
Set zero flow | 14 |
Total Volume reset | 14 |
Damping time/ Correction Factor | 14 |
Calibration Factor | 14 |
Diagnostics | |
Status/Error/Warning messages | |
Application Information | 17 |
Transducer positioning | 18 |
Mounting transducers | |
Reynolds Number | |
Diagonal Mode Setup | |
Specification | 22 |
Diagonal Mode setup | |
Flow Range | 23 |
Sound Speeds | 24 |
Liquid sound speeds | |
Battery charge circuit operation |
INTRODUCTION
The PORTAFLOW™ 216 is a portable flow meter designed by Micronics for use on liquid flows in full pipes, which utilises Ultrasonic
Easy to operate, the Portaflow 216 features are as follows:
•Large easy to read Graphics Display with backlighting.
•Simple FAST TRACK set up procedure.
•Simple to follow keypad.
•IP55 electronics enclosure.
•Guide rail assembly with chains.
•Pulse Output or
•10hr Battery (rechargeable).
•
•Continuous signal monitoring.
The instrument displays volumetric flow rate in m3/hr, m3/min, m3/sec, g/min, US g/min, US g/hr, l/min, l/sec and linear velocity in metres and feet per second. The display shows the total volume both positive and negative with up to a maximum of 12 digits.
The following simple guide will enable the user to quickly set up the flow meter to measure flow. Additional data on the facilities available and many useful hints are also contained in this manual.
Fast Track Set up Procedure
Switch on and press ENTER.
2