The instrument now asks for the Pipe outside diameter? After entering the outside diameter in millimeters press
ENTER.
QUICK START |
|
Dimension units | mm |
Pipe O.D.? | 58.0 |
Pipe wall thickness now appears on the display. Enter the pipe wall thickness in millimeters, then press ENTER.
QUICK START |
|
Dimension units | MILLIMETRES |
Pipe O.D.? | 58.0 |
Wall thick? | 4.0 |
|
|
Pipe lining thickness now appears on the display. If the pipe you are measuring has a lining, enter the Pipe lining thickness. If nothing is entered the instrument automatically assumes there is no lining. Press ENTER to move onr after entering the data.
QUICK START |
|
Dimension units | MILLIMETRES |
Pipe outside diameter? | 58.0 |
Wall thick? | 4.0 |
Lining? | 0.0 |
|
|
The instrument now displays Select pipe wall material. Using the scroll keys it is possible to scroll up or down the options available. Select the required material and press ENTER.
QUICK START
Select pipe wall material:
Mild Steel
S’ less Steel 316
S’ less Steel 303
Plastic
Cast Iron
Ductile Iron
Copper
Brass
Concrete
Glass
Other (m/s)
The following will only be displayed at this stage if a lining thickness has been entered. Use the scroll keys to select the required material, then press ENTER. If Other is selected, enter the sound speed of the lining in metres/sec.
7
