Microsoft MN-500 manual Test Your Internet Connection

Models: MN-500

1 82
Download 82 pages 18.39 Kb
Page 26
Image 26

To configure the TCP/IP properties of a computer running Windows XP operating system

1.Click Start, click Control Panel, and then double-click Network Connections.

2.Double-click the icon for the connection you want to configure, and then, in the Connection Status dialog box, click Properties.

3.On the General tab, under This connection uses the following items, click Internet Protocol (TCP/IP), and then click Properties.

4.Click Obtain IP address automatically, and then click Obtain DNS server address automatically.

5.Click OK to close the TCP/IP Properties dialog box, and then click OK to close the Connection Properties dialog box.

Step 9: Test Your Internet Connection

1.Turn on your broadband modem.

2.From the Home page of the Base Station Management Tool, under Wide Area Network (WAN) settings, check the status of the Broadband connection.

3.If the status is Connected, your setup is complete. If the status is Disconnected, click Renew if you have a dynamic or static IP connection, or Connect if you have a PPPoE connection. If the status is still Disconnected, confirm your Internet settings with your ISP, and then try to configure the base station again.

20Microsoft Broadband Networking Wireless Base Station User’s Guide

Page 26
Image 26
Microsoft MN-500 manual Test Your Internet Connection