To restore the base station to factory default settings
1.Use a pointed object to press and hold the Reset button on the back of the base station.
2.When the Power light on the front begins to blink green and orange, release the Reset button.
The Power light first turns solid orange. When it turns solid green, the restoration is complete. This process takes about a minute.
Power light
About Wireless (Radio) Connections
Your base station communicates by radio transmission. Radio waves travel in all directions, and can be transmitted through walls and floors. This section on wireless connections provides important information about wireless performance.
Placement of Wireless Components
The following placement recommendations will help you achieve the best wireless range, coverage, security, and connection speed from your wireless devices:
OPlace the base station near the center of your intended wireless network area. This will minimize the possibility of eavesdropping by neighboring wireless networks.
OPlace wireless components in direct line of sight to one another, if possible.
OPlace wireless components on desks or shelves when possible (instead of on the floor) to avoid obstacles and achieve better reception on upper stories of buildings.
OAvoid placing wireless components in a way such that large, solid objects block the direct path between them. Building components, such as fireplaces, concrete or masonry walls and floors, metal framing, UV window film, and metallic paint will reduce radio signal strength.
