2.Take the following items to the computer that is currently connected to your broadband modem. If this computer does not meet the base station setup requirements, you can use any other computer that does. However, you will need to enter your Internet settings manually.
O Setup and Network Utility CD
O Microsoft Wireless Base Station
O Blue Ethernet cable included in the box
O Power supply (Use only the AC adapter included in the box.) O Blank floppy disk included in the box
O This User’s Guide
O Installation CD for your Windows operating system if your computer is running Windows Me, Windows 98, or Windows 98 SE
Step 2: Run the Setup Wizard
1.Insert the Setup CD into the CD drive. If the Setup Wizard does not start automatically after a few seconds, open My Computer,
Note During setup, you may be prompted to restart your computer or insert your Windows operating system CD. You may also need to specify the location of the required setup files on the Windows CD. Do this by typing the drive letter of your CD drive and the appropriate directory (for example, D:\win98).
2.On the first screen that appears, click Set Up a Product.
The wizard will detect any components that are missing on your computer and specify which of these components are required for setup and which are optional.
3.Continue following the instructions in the wizard to install missing components (as necessary).
4.When the wizard asks whether you are setting up a base station or an adapter, click Base station.
5.When the wizard asks which base station you are setting up, click
6.Continue following the instructions in the Setup Wizard. If you have a question, click a Help link on the screen for more information.
If you need to cancel setup before it is complete, you can rerun the Setup Wizard. When the Setup Wizard restarts, click Set Up a Product.
Chapter 2: Setup 11
