Programme sequence

= Low water level  = Medium water level  = High water level  = Intensive rhythm  = Normal rhythm

 = Sensitive rhythm

 = Ultra sensitive rhythm  = Handwash rhythm  = Carried out

– = Not carried out

The washing machine has fully elec‐ tronic controls with automatic load rec‐ ognition. It takes in the right amount of water required for the programme de‐ pending on the amount of laundry and its absorbency rate.

The programme sequences shown in the chart are based on the standard programme with a full load.

The washing machine programme se‐ quence display shows which stage of the programme has been reached.

Special features in the pro‐ gramme sequence

Anti-crease:

At the end of the programme the drum continues to turn at intervals for up to 30 minutes to help prevent creasing.

Exception: There is no anti-crease phase in the Woollens programme. The door can be opened at any time during the anti-crease phase.

1)A second rinse is carried out when a temperature of  or above is se‐ lected. A third rinse is carried out when a temperature below  is selected.

2)An additional rinse is carried out if:

– there is too much foam in the drum

a spin speed lower than 700 rpm has been selected

the spin speed has been deselected

3)An additional rinse is carried out if:

the Water plus option is selected and the Extra rinse or Water + and Extra rinse setting has been activated for the Water plus option in Settings.

4)Run-up to spin: A run-up to spin is carried out before the wash process begins to deflate down filled items. Subsequent water intake for the main wash is through compartment .

5)An additional rinse is carried out if: the Water plus option is selected.

51

Page 51
Image 51
Miele 09 844 920 operating instructions Special features in the pro‐ gramme sequence