Changing the programme sequence
Adding or removing laundry af‐ ter the programme has started
Press the Start/Stop button.
The following will appear in the display:
Cancel programme | |
|
|
Scroll up the list with the or sen‐ sor to:
Add laundry | |
|
|
Touch the OK sensor.
If this message does not appear in the display then it is no longer possible to add or remove items of laundry.
The programme will stop and the door will unlock.
Pull open the door.
Add or remove items.
Close the door.
Press the Start/Stop button. The programme will continue.
Please note:
Once a programme has started the washing machine cannot recognise any adjustment to the load.
For this reason, if laundry is added or removed after the start of a programme, the machine will always complete the programme cycle assuming a full load
The door cannot be opened, if:
–the suds temperature is above 55°C.
–the water is above a certain level.
–the programme has reached the Spin stage.
If you want to open the door when the above conditions are present you will need to cancel the programme.
The safety lock will remain activated if the temperature in the drum is above 55°C. The lock will not deactivate until the temperature has dropped to below 55°C.
53
