Settings
Suds cooling
When this is activated, additional wa‐ ter flows into the drum at the end of the main wash to cool the suds down. Hot suds can damage plastic drainage pipes.
Suds cooling takes place when a tem‐ perature of 70°C or higher is selected for the Cottons programme.
Suds cooling should be activated:
–to prevent the danger of scalding if the drain hose is hooked over the edge of a sink or basin.
–where drainage pipes do not comply with DIN 1986.
Factory default setting: Suds cooling is switched off.
Anti-crease
The
The drum continues to turn at intervals for up to 30 minutes at the end of the programme. The door can be opened at any time.
Factory default setting:
97
