TwinDos
Open the Settings menu
You have to enter the type of deter‐ gent being used in the Settings menu.
Switch on the washing machine and wait until the standard display lights up.
2:59 | 1600 |
| OK |
| |
Touch the and sensors at the same time until the following appears in the display:
Language | |
|
|
The "Settings" menu has been opened.
Touch the sensor, the following will appear in the display:
Dispensing unit | |
|
|
Touch the OK sensor.
Detergent / amount | |
|
|
Touch the OK sensor.
Settings for UltraPhase 1 and UltraPhase 2
The dosage amounts for UltraPhase 1 and UltraPhase 2 are
Container 1 | |
|
|
Touch the OK sensor.
Not defined | |
|
|
Use the or sensor to select UltraPhase 1 and confirm your choice with the OK sensor.
Dosage amount | 60 ml |
|
|
Tip: If you live in an area with water hardness levels I () or III (), adjust the dosage for Miele products accord‐ ing to the information given on the packaging.
Use the OK sensor to confirm the dosage amount or use the and sensors to change the amount.
The washing machine will automatically assign UltraPhase 2 to compartment 2. You just need to confirm or change the dosage amount.
Dosage amount | 45 ml |
|
|
Use the OK sensor to confirm the dosage amount or use the and sensors to change the amount.
22
