Miele G 7860 When restoring all changed values, please note, Programming special functions

Programming special functions

4.Re-setting all parameter changes back to the factory settings.

^Turn the programme selector to STOP f.

^Switch off the machine.

^Press and hold ß and 6 at the same time, and whilst doing so, switch the machine on with the I-0button.

The current programme status "P..." will appear in the display and the p / 6 indicator light will come on.

^Press 0 as often as necessary or hold it pressed in until E33 (programming level 33) appears in the display.

^Turn the programme selector to any switch position (except STOP).

00 or PP will appear in the display.

00 = factory setting (Electronics have not been

re-programmed).

PP = Electronics have been re-programmed.

^If PP is displayed, press ß to change from PP to 00.

^Press 6. SP appears.

^Press 6 again. All values which had been changed have now been now reset to the factory settings.

When restoring all changed values, please note

that any new setting for the water hardness level also reverts to the factory setting of 19 °d (3.4 mmol/l).

The final rinse temperature of 85°C/1’ is now 93°C/3’.

Re-setting is required in both cases.

38