Warning and Safety instructions
This machine complies with all relevant local and national safety requirements. Incorrect use can lead to personal injury and damage to property.
Read the operating instructions carefully before starting to use this machine. This way you will avoid the risk of accidents and damage to the machine.
Keep these instructions in a safe place for reference, and pass them on to any future user.
Correct use
This machine is designed for commercial use only, as described
in these Operating Instructions. Alterations to the machine, or using it for purposes other than those for which it was designed, are unauthorised and could cause harm. The manufacturer cannot be held liable for damage caused by improper or incorrect use of the machine.
This equipment may only be installed in mobile installations
such as ships, oil rigs etc. if a risk assessment of the installation has been carried out by a suitably qualified engineer.
Please pay attention to the following notes to avoid injury and damage.
This machine should be commissioned and then maintained
by a Miele authorised and trained ser- vice technician or other suitably qualified and competent approved person. Repairs and other work by unqualified persons could be dangerous.
Do not install the machine in an area where there is any danger of
explosion or of freezing conditions.
The electrical safety of this machine can only be guaranteed if
connected to a correctly installed earthing system on site. It is imperative that this basic safety requirement is tested regularly and, where there is any doubt, the electrical wiring system on site should be inspected by a qualified electrician.
The manufacturer cannot be held liable for damage or injury caused by the lack of or inadequacy of an effective earthing system (e.g. electric shock).
A damaged machine is dangerous. Switch off at the mains immediately
and call the Miele Service Department or an authorised and trained Miele Ser- vice Dealer or other suitably qualified and competent approved person.
6
