Manuals / Miele / Kitchen Appliance / Dishwasher

Miele G 7860 Guide to the machine, at the back of the machine bFilter combination

Models: G 7860

1 52

Download 52 pages 42.3 Kb

Page 5

Image 5

Guide to the machine

aConnections for optional DOS module dispenser pump for liquid cleaning agent

- at the back of the machine -

bFilter combination

cSalt reservoir

(for the water softener)

dDispenser for powder cleaning agent

eDual rinsing agent reservoir (with dosage selector)

fLevel indicators

Page 5

Image 5

Miele G 7860 Guide to the machine, at the back of the machine bFilter combination, cSalt reservoir for the water softener

Contents

Operating instructions Commercial dishwasher GContents Description of the machine Guide to the machine fLevel indicators dDispenser for powder cleaning agentGuide to the machine at the back of the machine bFilter combinationCorrect use Warning and Safety instructionsdamaged, or cause an injury Warning and Safety instructionsthe items being cleaned Warning and Safety instructionsWarning and Safety instructions Using accessoriesDisposal of your old machine Disposal of your old machine Caring for the environmentDisposal of the packing material Add cleaning agent Before using for the first timeSet the water softener unit Add rinsing agentOpening and closing the door To cancel a programmeElectro-thermaldoor lock To open the door aOpening and closing the door To open the door with the emergency releaseWater softener Water softener SettingsWater softener Setting the water softenerWater softener Filling the salt reservoirWater softener Salt indicatorAdding rinsing agent Adding rinsing agent Setting the dosageAdding cleaning agent Adding cleaning agent Maintenance of the dispensing systemEvery 12-18months Loading the machine Loading the machinePreparing the load Please noteO 181 Top basket Loading examplesU 880 Bottom basket Separate lower baskets U 880 Bottom basketTo adjust the top basket Adjusting the top basketItems not suitable for dishwashers Example: Top basket OSelecting a programme Page When to use Programme chartPowder cleaning agent ProgrammeProgramme sequence Starting a programme Switching onOperation Changing a programme Switching offSelecting an additional function Programme sequence display^Open the door a To cancel a programmeOperation Programming special functions Programming special functions 1.1.2 Venting the dispensing systemHaving changed a value or all values ^Turn the programme selector to STOP f Programming special functionsHaving changed a value or all values Programming special functionsProgramming special functions 3. Audible tone BuzzerProgramming special functions When restoring all changed values, please noteCleaning the filters in the wash cabinet Cleaning and careCleaning the coarse filter Cleaning the fine, flat and micro-finefiltersCleaning and care Cleaning the spray armsCleaning and care Cleaning the drain pump and non-returnvalve^ Release the locking clamp Cleaning the control panel Cleaning the filters in the water inletCleaning the front of the machine To clean the filtersThe machine does not start Correcting minor faultsFaults / possible causes Correcting minor faults After sales serviceInstallation Please refer to the installationdiagram supplied with the machine Position and secure the machine InstallationCover plate protects the worktop Decor frame and decor panel optionalElectrical connection To remove the service panel and plinthTHIS APPLIANCE MUST BE EARTHED Bonding connectionTo re-assemble See also the installation diagram suppliedElectrical connection Connection to the water inlet PlumbingPlumbing DrainageTechnical data M.-Nr.06 134 790 / Alteration rights reserved /