Miele G 7860 Switching off, Changing a programme, Selecting an additional function, Programme end

Operation

Changing a programme

Provided the Start button has not yet been pressed, a wrongly selected programme may be changed as described below (if it has been pressed, see "Cancelling a programme"):

^Turn the programme selector to the required programme.

^Select additional function DRYING 0 again if required (see "Selecting an additional function").

^Press the Start button 6.

Selecting an additional function

The following additional function can be selected:

^0 DRYING

may be selected as an additional function as soon as the programme has been selected (except with D PRE-RINSE and 6 DRAIN). Drying is phased over 10 minutes. The total running time of the programme lengthens accordingly.

Programme sequence display

The indicator light for the active programme stage lights up during the programme.

kReactivation

IPre-wash

lMain wash

HInterim rinse / Final rinse

cDrying (additional function)

rEnd of programme (Programme parameters have been reached)

Programme end

The programme has ended when r lights up constantly in the programme sequence display and the Start indicator light 6 has gone out. A "0" appears in the middle of the display. All the other indicator lights come on and go out in sequence. At the same time a buzzer sounds for a maximum of 30 seconds (standard setting). The buzzer can be changed (see "Programming special functions").

Use the ß button to call up the total running time of a programme or the actual temperature.

Switching off

^Press and release the I-0button.

Note:

As the machine is fitted with an electro-thermal door lock, the door can only be opened if the I-0button is pressed in (see "Opening and closing the door").

31