Manuals / Miele / Kitchen Appliance / Dishwasher

Miele G 7860 Electrical connection, To re-assemble, See also the installation diagram supplied

Models: G 7860

1 52

Download 52 pages 42.3 Kb

Page 48

Electrical connection

To re-assemble:

^Refit the plastic protective cap, plinth facing and service panel in the reverse order to which they were removed.

See also the installation diagram supplied.

48

Image 48

Miele G 7860 operating instructions Electrical connection, To re-assemble, See also the installation diagram supplied

Contents

Commercial dishwasher G Operating instructionsContents Description of the machine Guide to the machine dDispenser for powder cleaning agent fLevel indicatorsGuide to the machine at the back of the machine bFilter combinationWarning and Safety instructions Correct useWarning and Safety instructions damaged, or cause an injuryWarning and Safety instructions the items being cleanedUsing accessories Disposal of your old machineWarning and Safety instructions Caring for the environment Disposal of the packing materialDisposal of your old machine Before using for the first time Add cleaning agentSet the water softener unit Add rinsing agentTo cancel a programme Opening and closing the doorElectro-thermaldoor lock To open the door aTo open the door with the emergency release Opening and closing the doorWater softener Settings Water softenerSetting the water softener Water softenerFilling the salt reservoir Water softenerSalt indicator Water softenerAdding rinsing agent Setting the dosage Adding rinsing agentAdding cleaning agent Maintenance of the dispensing system Every 12-18monthsAdding cleaning agent Loading the machine Loading the machinePreparing the load Please noteLoading examples O 181 Top basketU 880 Bottom basket Separate lower baskets U 880 Bottom basketAdjusting the top basket To adjust the top basketItems not suitable for dishwashers Example: Top basket OSelecting a programme Page Programme chart When to usePowder cleaning agent ProgrammeProgramme sequence Switching on OperationStarting a programme Switching off Changing a programmeSelecting an additional function Programme sequence displayTo cancel a programme Operation^Open the door a Programming special functions 1.1.2 Venting the dispensing system Having changed a value or all valuesProgramming special functions Programming special functions ^Turn the programme selector to STOP fProgramming special functions Having changed a value or all values3. Audible tone Buzzer Programming special functionsWhen restoring all changed values, please note Programming special functionsCleaning and care Cleaning the filters in the wash cabinetCleaning the coarse filter Cleaning the fine, flat and micro-finefiltersCleaning the spray arms Cleaning and careCleaning the drain pump and non-returnvalve ^ Release the locking clampCleaning and care Cleaning the filters in the water inlet Cleaning the control panelCleaning the front of the machine To clean the filtersCorrecting minor faults Faults / possible causesThe machine does not start After sales service Correcting minor faultsPlease refer to the installation diagram supplied with the machineInstallation Installation Position and secure the machineCover plate protects the worktop Decor frame and decor panel optionalTo remove the service panel and plinth Electrical connectionTHIS APPLIANCE MUST BE EARTHED Bonding connectionSee also the installation diagram supplied Electrical connectionTo re-assemble Plumbing Connection to the water inletDrainage PlumbingTechnical data Alteration rights reserved / M.-Nr.06 134 790 /