Miele G 7883 CD installation instructions Buzzer, Programming functions

Programming functions

Buzzer

The buzzer can be programmed for the following functions:

–a continuous tone at the end of a program,

–an error signal that beeps in 1-second intervals, and

–a sample-collection signal (allows a sample of the final rinse water to be collected) that beeps in sets of 3 followed by a 2-sec pause. Contact Miele Technical Service to program the sample-collection

signal.

The numbers shown in the display correspond to the following settings:

20Buzzer off

21End of program (factory setting)

22Error

23End of program + Error

24Sample-collection signal

25End of program + Sample-collection signal

26Error + Sample-collection signal

27All functions (End of program + Error + Sample-collection signal)

Step Display / Result

^Press the 0 button until E04 appears in the display. E04

^	Turn the program selector to "Inorganica".	21
^ Press and hold the ß button until the required value		26
	appears in the display, e.g., 26.

Value selected:

The buzzer will sound for 30 sec during the selected setting.

To switch it off earlier:

–Turn the program selector to f.

–Press the ß button.

–Interrupt the power supply, e.g., open the door.

39