Plumbing
–Connect the intake hose for the steam condenser (without water safeguard) to the cold water faucet.
–See the next page for how to connect the DI water line.
–Water valves with 3/4 inch thread are to be provided on site. They should be easily accessible, because the water supply will need to be turned off when not in use.
–The inlet hoses are approx. 5 ½ ft (1.7 m) long pressure hoses with 3/4 inch thread. Do not remove the water inlet filters in the threads.
–Install the large surface area filters (in the kit supplied with the machine) between the water valve and the water inlet hose (see illustration in "Cleaning the water inlet filters"). The large surface area filter for distilled water is made of stainless steel and can be recognized by the matte surface.
Do not cut or damage the inlet hose in any way.
Please also refer to the installation diagram.
70
